Compozit
Композит
Офис: 
+7(495)787-88-28

Сделать заказ / задать вопрос

Carbon Fibre FibArm Tape 530/600

Carbon Fibre FibArm Tape 530/600

Unidirectional Carbon Fibre FibARM Tape is used in the System of External Reinforcement

Retail price  2 313 rub / running meter
- +

Please be aware that the minimum shipping length is 50 r.m. The price is set for 1 r.m.

All prices are for RF sales only. If you are interested in prices outside RF please contact our dealers or sales department.

Application Areas

During construction and operation

  • elimination of deterioration of primary structures
  • increase of load-carrying capacity with higher design loads
  • elimination of errors in design and construction (undersized reinforcement section, concrete strength does not correspond to design strength, shift of reinforcement position from a location specified in the design)
  • alteration of the structural layout of building elements, formation of apertures

At the design stage

  • increase in seismic resistance
  • increase of structural strength with the same costs of material
  • enhancement of load bearing capacity at extreme loads
  • increase of durability

Production method

FibARM fabrics are manufactured from carbon fibres produced through chemical and mechanical processes on organic fibres in inert atmosphere

Packaging

2 bobins in carboard box. The price is for 1 running meter. The fabric can be purchased in 50 fold amounts

Shelf life

Three years from the production date. After the shelf life is expired the carbon fibre fabrics can be used after the analysis on technical conditions is repeated.

Application

The tape should be smoothen on a layer of applied adhesive without crimps and extreme pulling. After the tape is layed it should be rolled down along fibres. As long as during rolling-down the tape is impregnated, the resin should be evenly spread. There should be no crimps or flakings. The impregnated tape should be slightly sticky at the touch but have no visual traces of adhesive resin. The excess adhesive should be removed.

Storage and transportation

Carbon fibre tapes should be stored in packaging at a temperature not below 10C. Humidity during storage should not exceed 85%. The products should be stored in closed, dry and frequently aired warehouses. Tapes are packaged in corrugated cardboard boxes. The product can be transported in all covered vehicles according to cargo transport regulations valid for the chosen mode of transportation.



If you would like to buy it in lesser quantities, please contact our partners

  • Material type

    Uni-Directional

  • Number of filaments

    12K

  • Producer

    CJSC "Prepreg-ACM"

  • Fabric Width

    600 mm

  • Surface Density

    530 g/m2

  • Length

    50 m

  • Fabric Producer(base)

    Other manufacturers

Additional documents for download and review
View all products

Your shopping cart is empty

Catalog filter
Show

FibARM

System of external reinforcement

The reinforcement system based on a carbon cloth can restore and increase the carrying capacity of structures in a short time and less effort than traditional methods, as well as significantly increase the life of the structure.


Обратная связь